Archive

Archive for the ‘teknoloji’ Category

vsep



VSEP Membrane Cleaners In addition to filtration systems, New Logic manufactures a complete line of chemical cleaners designed to maintain maximum flow rates in all VSEP applications.Years of exhaustive research and development by New Logic engineers have resulted in seven chemical cleaners formulated to attack the most stubborn foulants across a wide range of membranes and feed streams.While designed for VSEP membrane filtration systems, these advanced formulas are perfect for cleaning any membrane.To learn more about VSEP Advanced Cleaning Solutions, please choose a link below to visit our sister site http://www.membranecleaner.com/.


While membrane-based separations of liquids from solids have enjoyed increasing popularity over the last 20 years, the technology has an inherent Achilles heel that affects all membrane devices: fouling. This long-term loss in throughput capacity is due primarily to the formation of a boundary layer that builds up naturally on the membranes surface during the filtration process.In addition to cutting down on the flux performance of the membrane, this boundary or gel layer acts as a secondary membrane reducing the native design selectivity of the membrane in use.sep
Categories: teknoloji

AFM (Autoriteit Financiële Markten) Vergunning.

AFM vergunning
Dit betekent dat wij als één van de weinigen voldoen aan alle door de AFM gestelde eisen, zoals op deskundigheid en integere bedrijfsvoering. Hierdoor bent u ervan verzekerd dat de investeringen bij GoedInvesteren streng worden gecontroleerd. Hieronder vindt u een afbeelding van de webpagina van de AFM waar onze vergunning op vermeld staat.
De AFM heeft op 10-10-2007 de vergunning aan GoedInvesteren verleend in het kader van de nieuwe wet Wft. Hiermee behoort GoedInvesteren tot de selecte groep van aanbieders van beleggingsobjecten die voldoen aan de eisen van de AFM (6 van de 44 aanvragers).
AFM Vergunning

Wat houdt de AFM vergunning in?

De nieuwe wet Wft is door de regering opgesteld ter bescherming van consumentenbelangen op het gebied van beleggingen. De Autoriteit Financiële Markten (AFM) controleert procedures en informatievoorziening nauwlettend. Tevens wordt de financiële vastlegging en verantwoording van de geld- en goederen stromen volgens vaste regels bestudeerd om te controleren of de inleg van investeerders wordt aangewend zoals vermeld in onze beleggingsprospectussen.

De AFM controleert of de gelden naar de juiste rekeningen worden overgemaakt. Ook de reservering voor onderhoud bij Stichting GoedInvesteren wordt op die manier streng gecontroleerd. De controle op financiële zekerheid, transparantie en zorgplicht vallen onder het doorlopend toezicht van de AFM. Deze controle wordt periodiek gedaan onder andere om te controleren of alle investeringen op de juiste wijze worden gebruikt. Overigens heeft GoedInvesteren de laagste overheadkosten. Wij besteden dus extra veel geld aan uw bomen en het onderhoud.

Wat ook erg belangrijk is dat de AFM controleert of de aanbieder alles met betrekking tot de plantage in overeenkomsten heeft vastgelegd. Alle zaken die betrekking hebben op bedrijfsvoering, financiën en onderhoud moeten duidelijk vastgelegd zijn. Een jaarlijks verplicht gestelde controle van de plantages door een onafhankelijke taxateur maakt daar onderdeel vanuit. Van deze jaarlijkse taxaties ontvangt u als investeerder elk jaar een afschrift zodat u exact weet hoe uw investering erbij staat.

Hoe kan ik controleren of een aanbieder een vergunning heeft?

Er zijn tot nu toe slechts 6 van de 44 aanvragers in onze branche die een vergunning hebben gekregen. Er zijn nog maar een paar aanvragen in behandeling, de rest is al afgewezen, dus veel vergunningen zullen er niet meer bijkomen. Dat maar weinig aanbieders deze vergunning hebben verkregen was te verwachten en geeft u als investeerder nu eindelijk de mogelijkheid om een duidelijk onderscheid te kunnen maken tussen gecontroleerde en niet-gecontroleerde aanbieders. Degenen die geen vergunning krijgen, mogen namelijk niet meer doorgaan met verkopen van hun investeringsprojecten onder de Wft. Vraagt u dan ook altijd of de aanbieder waarmee u in zee wilt gaan beschikt over een AFM vergunning. Of bel de AFM op tel.nr. 0900-540 0540.

Kan een bedrijf zonder vergunning toch investeringen aanbieden?

Er is helaas nog een gat in de wetgeving die verkoop zonder enig toezicht (!!) onder bepaalde voorwaarden mogelijk maakt! Dit is de zogenoemde vrijstellingregeling. Door gebruik (lees: misbruik) van deze regeling te maken wordt men totaal niet gecontroleerd op financiële huishouding, deskundigheid, bedrijfsvoering, etc! En men ‘mag’ (kan) ook alles beweren wat men maar wil! Daarom vindt u vaak bij de partijen zonder vergunning zeer hoge rendementen zonder goede onderbouwing!
Met name in de vastgoed wordt van deze vrijstelling al veel gebruik van gemaakt. Slechts 10 van de 90 vastgoedprojecten heeft een vergunning.

In de vrijstellingsregeling staat dat men niet onder de Wft valt als een bedrijf investeringsprojecten aanbiedt waarbij een investeerder minimaal € 50.000 moet investeren om te kunnen deelnemen. De AFM is – net als GoedInvesteren – niet gelukkig met deze regeling. De AFM controleert de wetgeving maar stelt deze niet op, dat doet de overheid. De gedachte achter deze regel is dat mensen die € 50.000 kunnen investeren zelf wel kunnen (laten) controleren met wie ze in zee gaan. Echter de ervaring leert, dat dit niet zo werkt in de praktijk omdat de drempel veel te laag is. Begin oktober zijn hier kamervragen over gesteld.
Een andere vrijstellingsmogelijkheid is de grens van maximaal € 2.500.000 per jaar en per project. Door regelmatig ‘nieuwe‘ relatief kleine projecten aan te bieden kan men toch nog steeds veel geld bij investeerders ophalen, zonder enige verantwoording te hoeven afleggen aan wie dan ook. Er is dus totaal geen controle (ook niet door de AFM).

GoedInvesteren dringt er bij de overheid en de AFM op aan dat deze gaten in de wetgeving, snel worden gedicht. Aanbieders die gebruik maken van deze vrijstellingsmogelijkheden staan nergens geregistreerd en staan niet onder vergunning en controle van de AFM. Investeerders blijven hierdoor grote risico’s lopen en worden al gauw de dupe van dubieuze aanbieders, zoals de vastgoed aanbieders die recentelijk in het nieuws waren.

Categories: teknoloji

Huntron Scanners

Add Scanning Capabilites to Your Huntron Tracker Model 30 System

Adding a Huntron® Scanner to your Tracker Model 30 system lets you access components using standard DIP clips and cables, custom cables to PCB connectors or interface to a bed-of-nails.
You can compare one component with another in real-time (64 pins max.) or use your PC to automate testing and scan up to 128 pins.
Huntron Scanners can be used with a Huntron Access Prober to provide Common line connections while the Prober is probing a PCB. This method gives you up to 128 selectable Commons to use. For example, you can connect the Scanner to a connector on a PCB mounted in the Prober using a common ribbon style cable. While the Prober is probing, any one of the lines on the connected ribbon cable can be selected as the Common reference. This would provide you true point-to-point testing capabilities.
Note: The ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to commercial sales only.

Scanner II and Scaner 31S users may want to consider these Optional Accessories to enhance their test capabilities.

Highlights:

* The Scanner II and Scanner 31S accessories add scanning capability to the Tracker Model 30
* All Scanners have a minimum 64 pin capability
* The Scanner II can scan up to 128 pins when the A and B channels are combined
* The Scanner 31S use standard IDC style connectors
* The Scanner II uses the common SCSI-2 (68 pin) style connectors
* Up to 8 Scanner IIs can be “daisy-chained” to increase the available number of test pins

Selecting Accessories for your Scanner II
The Scanner II accessories for interfacing to your printed circuit board come “ala carte”. This means that you select the accessories you want included with your Scanner. Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter required with Scanner II) or a mutli-pin breakout cable. Details on these accessories are provided on this page.

Categories: teknoloji

The Edgeos Security Services Platform

The Edgeos team

Security Tools and Resources

The Edgeos team is actively involved in participating and supporting the global community of security and technology professionals. All of the tools and resources provided in this section of the Edgeos web site are created and/or sponsored by Edgeos, and are available for free. We welcome your comments and feedback about these resources, or ideas about other tools and resources we can provide.

Security Vulnerabilities and Threats Database

Browse and search Edgeos’ database of vulnerabilities and exploits. The database currently contains 24935 unique vulnerabilities, is updated every 12 hours, is cross-referenced by threat family and risk factor, and links to external sources (such as CVE, Bugtraq, and OSVDB). (View Edgeos’ Security Threats Database)

Security Announcements and Alerts

Edgeos’ New Vulnerabilities free email newsletter and RSS news feed provides fast notifications and summaries of new security vulnerabilities when they are added to Edgeos’ threats database. (More about Security Alerts)

Nessus Knowledge Base

The Nessus Knowledge Base contains information and documentation about nearly every option and configuration variable for the Nessus vulnerability scanner. Each option is documented and cross-referenced, including a name, description, default setting, enable/disable considerations, scan/host/network impacts, option relationships, and much more. (View the Nessus Knowledge Base)

Categories: teknoloji

PORTABLE FLOWMETERING / THE GOOD EXPERT NEEDS THE

30 years of experience and 6 generations of instruments (M210, M211, UF 320P, UF 321T, and now DigiSonic and Minisonic) permit us to offer the best of the technology and moreover the most pertinent information linked to your measurements works.

To justify a measurement means being able to criticize it even on a pipe with one inaccessible pipewall.
To this end, our instruments are composed of (in accordance with our specification sheet)

– an internal or external thickness measurement
– a dynamic analyser of the ” echo ” signals, indeed a numeric oscilloscope function (Digisonic) because every pipe can disclose surprises
– an optimization function of time measurement, metrological advantage in comparison to correlation or phase difference measurement
– an access to physical measurements, like the ” delta T “, the speed of sound, the signal level and their quality indexes.

The carrying out of a measurement must be as simple with :

– a choice of adapted and high performance probes, including their supports
– simple and complete intuitive menus in your own language
– a readable, numeric and graphic display
– simple possibilities of data logging and export to the PC and printing possibilities.
– an important battery life and a fast charge of the battery
– a robustness for field survey work

Our applications have few limits and constantly improve themselves, accepting from ultrapure liquids to the one relatively charged or viscous and of pipes from 8mm to 5000mm.

As an example :



– The metrological checking of existing meters and flowmeters according to the accuracy required. Our instruments can meet all ISO 9000 requirements, therefore being checked and certified

– The supervision of indusrial, chemical and petrochemical process…no matter the aggression or pressure of the fluid. For the measurement in Ex area (hazardous), thank you for consulting us.

– The balancing of heating or air-conditioning network, with the possibility of calculating the calorific power with the ” temperature measurement ” option

– The measurement on hydraulic circuit with, associated to pressure measurement, the capacity to measure a power energy

– The analysis of dense network in drinking water distribution

– The detection of leaks in networks (Vivendi)

– The flow supervision in situ of pipes before and after repairing (Salmson pumps, Sulzer)

– The measurements with a risk of radioactive contamination (Cogema, SGN…)

Categories: teknoloji

KYC compliance


Know Your Customer (KYC) compliance regulation has proved to be one of the biggest operational challenges banks, accountants, lawyers and similar financial service providers worldwide have had to overcome.

World-Check, the industry standard KYC compliance solution, provides an overview of KYC compliance and its origins, and outlines the compliance mandate as applicable to banks, accounting firms, lawyers and other regulated financial service providers – not just in the UK, Europe and the USA, but all around the world. Relied upon by more than 3,000 institutions worldwide, this KYC database solution provides effective legal and reputational risk reduction.

Why “Know Your Customer?”

The 9/11 terrorist attacks on the World Trade Centre revealed that there were sinister forces at work around the world, and that terrorists activities were being funded with laundered money, the proceeds of illicit activities such as narcotics and human trafficking, fraud and organised crime. Overnight, the combating of terrorist financing became a priority on the international agenda.

For the financial services provider of the 21st century, “knowing your customers” was no longer a suggested course of action. Based on the requirements of legislative landmarks such as the USA PATRIOT Act 2002, modern Know Your Customer (KYC) compliance mandates were created to simultaneously combat money laundering and the funding of terrorist activities.

What is Know Your Customer (KYC)?

Know Your Customer, or KYC, refers to the regulatory compliance mandate imposed on financial service providers to implement a Customer Identification Programme and perform due diligence checks before doing business with a person or entity.

KYC fulfils a risk mitigation function, and one its key requirements is checking that a prospective customer is not listed on any government lists for wanted money launders, known fraudsters or terrorists.

If preliminary KYC checks reveal that the person is a Politically Exposed Person (PEP), for example, Advanced Due Diligence must be done in order to ensure that the person’s source of wealth is transparent, and that he or she does not pose a reputational or financial risk in terms of their finances, public positions or associations. Beyond customer identification checks, the ongoing monitoring of transfers and financial transactions against a range of risk variables forms an integral part of the KYC compliance mandate.

But to understand the importance of KYC compliance for financial service providers better, its origins need to be examined.

Origins of Know Your Customer (KYC) compliance

The arrival of the new millennium was marred by a spate of terrorist attacks and corporate scandals that unmasked the darker features of globalisation. These events highlighted the role of money laundering in cross-border crime and terrorism, and underlined the need to clamp down on the exploitation of financial systems worldwide.

Know Your Customer (KYC) legislation was principally not absent prior to 9/11. Regulated financial service providers for a long time have been required to conduct due diligence and customer identification checks in order to mitigate their own operation risks, and to ensure a consistent and acceptable level of service.

In essence, the USA PATRIOT Act was not so much a radical departure from prior legislation as it was a firmer and more extensive articulation of existing laws. The Act would lead to the more rigorous regulation of a greater range of financial services providers, and expanded the authority of American law enforcement agencies in the fighting of terrorism, both in the USA and abroad.

In October 2001, President George W. Bush signed off the USA PATRIOT Act, effectively providing federal regulators with a new range of tools and powers for fighting terror financing and money laundering. During July 2002, the US Treasury proceeded to introduce Section 326 of the PATRIOT Act, a clause that removed some key burdens for regulators and added significant enforcement muscle to the Act.

What 9/11 changed, in essence, was the extent to which existing legislation was being implemented. Using the provisions of the earlier anti-terrorism USA Act as a foundation, it included the Financial Anti-Terrorism Act, which allowed for federal jurisdiction over foreign money launders and money laundered through foreign banks. Significantly, it is this anti-terror law that would make the creation of an Anti Money Laundering (AML) programme compulsory for all financial institutions and service providers.

Section 326 of the USA PATRIOT Act dealt specifically with the identification of new customers (“CIP regulation”), and made extensive provisions in terms of KYC and the methods employed to verify client identities.

In accordance with this piece of updated KYC legislation, federal regulators would hold financial institutions accountable for the effectiveness of their initial customer identification and ongoing KYC screening. Institutions are required to keep detailed records of the steps that were taken to verify prospective clients’ identities.

Although current KYC legislation does not yet demand the exclusion of specific types of foreign-issued identification, it recommends the usage of machine-verifiable identity documents. The ability to notify financial institutions if concerns regarding specific types of identification were to arise, combined with a risk-based approach to KYC, proved to provide a robust mechanism for addressing security concerns.

Effectively, the risk-based approach to customer due diligence grants regulated institutions a certain degree of flexibility to determine the forms of identification they will accept, and under which conditions.

KYC compliance: Implications for banks, lawyers and accounting firms

The KYC compliance mandate, for all its positive outcomes, has burdened companies and organisations with a substantial administrative obligation. Additionally, KYC compliance increasingly entails the creation of auditable proof of due diligence activities, in addition to the need for customer

Categories: teknoloji

High Flow Range Mass Coriolis Flow Meter

High Flow Range Mass Coriolis Flow Meter


ideal for the measurement of flow, density and temperature of liquids and slurries, such as aggressive or contaminated, sanitary or particle-filled fluids.


Features:
  • Flow ranges from 60 to
    60K Kg/Hr (2.2 to 1650 lb/min)
  • Accuracy up to 0.25% of reading
  • Materials: flow tubes –
    316 L, splitter flanges –
    316 Ti, housing – cast iron
  • Process temperature
    -40°F to 356°F
  • Ambient temperature
    -40°F to 140°F
  • Wide flow ranges
ACCURATE AND RELIABLE
This meter has the ability to
maintain high accuracy,
despite changing
viscosity conditions, with accuracy of +0.25% of reading.
EASY CLEANING
The ACM series has smooth stainless steel tubes and no moving parts, and is therefore very easy to flush and clean.
MULTI-TASKING
The ACM series of mass coriolis flow meters measure flow, density and temperature.
MATERIAL COMPATIBILITY
Because of the meter’s 316 stainless steel flow tubes, the ACM series can measure a wide range of materials.
VARIETY OF ELECTRONICS
Electronics available for the ACM series include a local, hazardous rated display and a remote, panel-mount digital display.
Categories: teknoloji

EXERGEN TemporalScanner



The TemporalScanner Thermometer is a totally non-invasive system with advanced infrared technology providing maximum ease of use with quick, consistently accurate measurements. Advanced, patented technology measures temperatures with a gentle stroke across the forehead.

The TemporalScanner Thermometer has been clinically tested for accuracy compared to rectal thermometers and temperature sensors inserted in the heart during course of patient treatment and accepted for use in major hospitals, making it the ideal thermometer for use with newborns, infants, children or adults.

The TemporalScanner has patented software, providing arterial heat balance. This unique process determines temperature by accurately measuring the balance between the tissues warming from arterial blood and tissues cooling (warming) caused by heat loss (gain) to the environment.

Why take temperature measurements at the skin surface over the temporal artery?

The best place to measure temperature is the center of the heart, but this can be done only under a doctor’s supervision. Doctors know that measurement of the blood temperature in a major artery accurately reflects true body temperature. The TemporalScanner Thermometer is designed to measure the temperature of the skin surface over the temporal artery, a major artery of the head.

The temporal artery is connected to the heart via the carotid artery, directly leading from the aorta, the main trunk of the arterial system. It offers constant blood flow. It is the only such artery positioned close enough to the skin surface to provide access needed to take an accurate measurement. It is easy to use because it is ideally located at the front portion of the forehead. The TemporalScanner is easier and gentler to use than other types of measurement devices such as oral, rectal, underarm and in-ear thermometers because it is truly non-invasive.

How does the TemporalScanner Thermometer work?

As you gently stroke the thermometer across the forehead crossing over the temporal artery, the sensor in its probe performs two processes:
First it scans like a video camera, capturing naturally emitted infrared heat from the arterial blood supply at about 1000 “frames” per second, locking in the highest temperature it senses and;
Second, at the same time, a patented system measures the ambient temperature of the site where the temperature is being taken. The patented “arterial heat balance” (AHB) software then synthesizes the two separate readings to accurately determine and display body temperature.
As with any thermometer, taking temperatures properly is critical to obtaining accurate temperatures, so please read all instructions carefully and thoroughly before using this product.
As with any thermometer, taking temperatures properly is critical to obtaining accurate temperatures, so please read all instructions carefully and thoroughly before using this product.
Categories: teknoloji

AFM (Autoriteit Financiële Markten) Vergunning.

AFM vergunning
Dit betekent dat wij als één van de weinigen voldoen aan alle door de AFM gestelde eisen, zoals op deskundigheid en integere bedrijfsvoering. Hierdoor bent u ervan verzekerd dat de investeringen bij GoedInvesteren streng worden gecontroleerd. Hieronder vindt u een afbeelding van de webpagina van de AFM waar onze vergunning op vermeld staat.
De AFM heeft op 10-10-2007 de vergunning aan GoedInvesteren verleend in het kader van de nieuwe wet Wft. Hiermee behoort GoedInvesteren tot de selecte groep van aanbieders van beleggingsobjecten die voldoen aan de eisen van de AFM (6 van de 44 aanvragers).
AFM Vergunning

Wat houdt de AFM vergunning in?

De nieuwe wet Wft is door de regering opgesteld ter bescherming van consumentenbelangen op het gebied van beleggingen. De Autoriteit Financiële Markten (AFM) controleert procedures en informatievoorziening nauwlettend. Tevens wordt de financiële vastlegging en verantwoording van de geld- en goederen stromen volgens vaste regels bestudeerd om te controleren of de inleg van investeerders wordt aangewend zoals vermeld in onze beleggingsprospectussen.

De AFM controleert of de gelden naar de juiste rekeningen worden overgemaakt. Ook de reservering voor onderhoud bij Stichting GoedInvesteren wordt op die manier streng gecontroleerd. De controle op financiële zekerheid, transparantie en zorgplicht vallen onder het doorlopend toezicht van de AFM. Deze controle wordt periodiek gedaan onder andere om te controleren of alle investeringen op de juiste wijze worden gebruikt. Overigens heeft GoedInvesteren de laagste overheadkosten. Wij besteden dus extra veel geld aan uw bomen en het onderhoud.

Wat ook erg belangrijk is dat de AFM controleert of de aanbieder alles met betrekking tot de plantage in overeenkomsten heeft vastgelegd. Alle zaken die betrekking hebben op bedrijfsvoering, financiën en onderhoud moeten duidelijk vastgelegd zijn. Een jaarlijks verplicht gestelde controle van de plantages door een onafhankelijke taxateur maakt daar onderdeel vanuit. Van deze jaarlijkse taxaties ontvangt u als investeerder elk jaar een afschrift zodat u exact weet hoe uw investering erbij staat.

Hoe kan ik controleren of een aanbieder een vergunning heeft?

Er zijn tot nu toe slechts 6 van de 44 aanvragers in onze branche die een vergunning hebben gekregen. Er zijn nog maar een paar aanvragen in behandeling, de rest is al afgewezen, dus veel vergunningen zullen er niet meer bijkomen. Dat maar weinig aanbieders deze vergunning hebben verkregen was te verwachten en geeft u als investeerder nu eindelijk de mogelijkheid om een duidelijk onderscheid te kunnen maken tussen gecontroleerde en niet-gecontroleerde aanbieders. Degenen die geen vergunning krijgen, mogen namelijk niet meer doorgaan met verkopen van hun investeringsprojecten onder de Wft. Vraagt u dan ook altijd of de aanbieder waarmee u in zee wilt gaan beschikt over een AFM vergunning. Of bel de AFM op tel.nr. 0900-540 0540.

Kan een bedrijf zonder vergunning toch investeringen aanbieden?

Er is helaas nog een gat in de wetgeving die verkoop zonder enig toezicht (!!) onder bepaalde voorwaarden mogelijk maakt! Dit is de zogenoemde vrijstellingregeling. Door gebruik (lees: misbruik) van deze regeling te maken wordt men totaal niet gecontroleerd op financiële huishouding, deskundigheid, bedrijfsvoering, etc! En men ‘mag’ (kan) ook alles beweren wat men maar wil! Daarom vindt u vaak bij de partijen zonder vergunning zeer hoge rendementen zonder goede onderbouwing!
Met name in de vastgoed wordt van deze vrijstelling al veel gebruik van gemaakt. Slechts 10 van de 90 vastgoedprojecten heeft een vergunning.

In de vrijstellingsregeling staat dat men niet onder de Wft valt als een bedrijf investeringsprojecten aanbiedt waarbij een investeerder minimaal € 50.000 moet investeren om te kunnen deelnemen. De AFM is – net als GoedInvesteren – niet gelukkig met deze regeling. De AFM controleert de wetgeving maar stelt deze niet op, dat doet de overheid. De gedachte achter deze regel is dat mensen die € 50.000 kunnen investeren zelf wel kunnen (laten) controleren met wie ze in zee gaan. Echter de ervaring leert, dat dit niet zo werkt in de praktijk omdat de drempel veel te laag is. Begin oktober zijn hier kamervragen over gesteld.
Een andere vrijstellingsmogelijkheid is de grens van maximaal € 2.500.000 per jaar en per project. Door regelmatig ‘nieuwe‘ relatief kleine projecten aan te bieden kan men toch nog steeds veel geld bij investeerders ophalen, zonder enige verantwoording te hoeven afleggen aan wie dan ook. Er is dus totaal geen controle (ook niet door de AFM).

GoedInvesteren dringt er bij de overheid en de AFM op aan dat deze gaten in de wetgeving, snel worden gedicht. Aanbieders die gebruik maken van deze vrijstellingsmogelijkheden staan nergens geregistreerd en staan niet onder vergunning en controle van de AFM. Investeerders blijven hierdoor grote risico’s lopen en worden al gauw de dupe van dubieuze aanbieders, zoals de vastgoed aanbieders die recentelijk in het nieuws waren.

Categories: teknoloji